Cara Download Service Tool. Sebelum melakukan langkah-langkah download, Anda harus tahu dulu seluk beluk dari aplikasi Service tool v3400 ini. 3400 adalah versi terbaru. Terakhir di update pada tanggal 7 Juli 2020. Ukuran file 10.3 MB. Pengembang tidak diketahui. Setelah memahami sedikit tentang aplikasi ini, sekarang waktunya mengunduh Service. How to Reset Canon ip2770 with Service Tool v3400 – ink absorber is nearly full – is really as follows: Switch on the printer, it’ll display a explanation of ” The actual Ink Absorber is nearly Full ” about the monitor screen To totally reset the printer should be Service Mode.
To create fix firmware reset for Samsung printers
SCX 3400 / 3401 / 3405 / 3406 / 3407 / W
need to know serial number (SN)CRUM serie and firmware version
This information can be found by printing the reports of the printer:
Configurationand Supplies Information
1. Hold STOP/CLEAR button about 4-5 seconds until the LED flashes once then leave.
Print configuration report which appears SERIAL NUMBER and VERSION FIRMWARE
2. Hold STOP/CLEARbutton again for approximately 15 seconds until the LED stay green, then leave.
Print Supplies Information which appears CRUM serie
If the printer NOT allows you to print the page (or the cartridge is at 0%)
quickly type the following key combination to print reports in
TECH MODE
+ (plus) + (plus) STOP– (minus) – (minus) STOP STOP (displays) UCPress +untilAA displays on the printer screen than START START
In the 2nd part (min 1:39 – 5:32)
– How simple it is to install fix firmware reset sent by us
– Working cartridge without chip (covered with tape or taken out)
– Counters reset to 100% after each stop/ start the printer
After reset is necessary only refill toner cartridge
Video refill, disassembly, cleaning cartridge MLT-D101
https://www.ereset.com/refill/reincarcare-refill-cartus-mlt-d101
Reset Tools 3400
Firmware version available to reset | Price | |||
SCX-3400 | 3.xx.01.10 | 3.xx.01.12 | 3.xx.01.19 | 13EUR / 15,3$ |
SCX-3400 W | 3.xx.01.10 | 3.xx.01.17 | 3.xx.01.19 | 13EUR / 15,3$ |
SCX-3401 | V3.07.01.00 – V3.07.01.19 | 23EUR / 36$ | ||
Firmware version 3.xx.02.xx can’t be reset remotely, only debug printer
.
How to order fix firmware reset ?
Place quick order!
Discount % % % !
_________________________________________________________________________________________________
Other details:
1/3 Install printerhttps://www.youtube.com/watch?v=hGyasSCZn6Q
2/3 Install Easy Printer Manager https://www.youtube.com/watch?v=NcoP01gczb0
3/3 Install wireless (SCX 3405W) https://www.youtube.com/watch?v=fZq8iPngmdY
Wireless scan (SCX 3405W) https://www.youtube.com/watch?v=1bQYNaxg5Nw
Softpedia Forum https://www.forum.softpedia.com/topic/906093-samsung-scx-340034053407-reincarcare-cartus-mlt-d101-toner-refill-resoftare-reset-contoare-si-altele/
IBM DS3200 and DS3400 SAN Reset – Syswipe
How to Reset – IBM DS Storage Area Network Appliances. NAS and SAN are becoming the standard for both Datacentres and Business. In the Web Hosting and Remote Storage they are invaluable. The IBM DS3200 range can provide 6gbps transfer rate to server. VALU run DS3200 and the 3400’s for backup and cloning purposes. Time to time we may need to expand the array or create new LUNS, this can be a tricky thing as SAN’s are a beast of their own.
Recently we needed to expand an array from 700GB to 1.4TB, the array build went horribly wrong, the IBM software would not let us delete the old array or logical drives, as we had an exact copy of the SAN data, we decided to reset the IBM DS3200 sub system, this leaves the IP as normal, and allows us to rebuild the arrays correctly.
The option RESET is not available in the storage manager, yet, in the storage manager for the DS4000-series this was available.
To reset a DS4000-series use the command sysWipe on both controllers and sysReboot afterwards, these commands are done through the serial port.
1. Login into the serial port shell of the controller.
2. Type the following: ld </Debug
2. Type the command: safeSysWipe
3. Next run the command sysReboot. This will reboot the controller.
4. Repeat steps 1-3 on the second controller.
To delete all licenses on the DS3000-series use the command safeSysWipe. Next run the command sysReboot. This will reboot the controller. Your box will work like new afterwards.
To reset Sub System, from the Enterprise screen of the DS3000 DSM, go to the script editor and type (paste) the following :-
Download Resetter Tool V3400
clear storageSubsystem configuration;
Verify and execute, this will reset the configuration of the storage array. IP address will remain the same.
If you want to run it from the DOS window, CD to the directory with the SMCLI executable , run SMCLI and add the IP address of the array you wan to reset and then run the same command. (You may need to use the “-c” switch after SMCLI in this case. The windows wont close , so a ctl C will be needed once you are sure the array has reset !
If needed you can place the :- “clear storageSubsystem configuration;” into a file and run it from the dos windows using SMCLI –f <ip address> -f filename.
You will need to reset the controller IP address manually. The default IP Addresses are 192.168.128.101 and 102.
source: http://www.valuwebhosting.com.au/blog/ibm-ds3200-and-ds3400-san-reset.html
Canon Reset Tool 3400
Cara Menggunakan Reset Tool V3400
cuongk6t – Nguyen Quoc Cuong